- Use resource sets to create a localized app.
- Android loads the correct resource set for the user's language and locale.
- If localized resources are not available, Android loads your default resources.
In this document
- Overview: Resource-Switching in Android
- Using Resources for Localization
- Localization Tips
- Testing Localized Applications
Android will run on many devices in many regions. To reach the most users, your application should handle text, audio files, numbers, currency, and graphics in ways appropriate to the locales where your application will be used.
This document describes best practices for localizing Android applications. The principles apply whether you are developing your application using ADT with Eclipse, Ant-based tools, or any other IDE.
You should already have a working knowledge of Java and be familiar with Android resource loading, the declaration of user interface elements in XML, development considerations such as Activity lifecycle, and general principles of internationalization and localization.
It is good practice to use the Android resource framework to separate the localized aspects of your application as much as possible from the core Java functionality:
- You can put most or all of the contents of your application's user interface into resource files, as described in this document and in Providing Resources.
- The behavior of the user interface, on the other hand, is driven by your Java code. For example, if users input data that needs to be formatted or sorted differently depending on locale, then you would use Java to handle the data programmatically. This document does not cover how to localize your Java code.
For a short guide to localizing strings in your app, see the training lesson, Supporting Different Languages.
Overview: Resource-Switching in Android
Resources are text strings, layouts, sounds, graphics, and any other static data that your Android application needs. An application can include multiple sets of resources, each customized for a different device configuration. When a user runs the application, Android automatically selects and loads the resources that best match the device.
(This document focuses on localization and locale. For a complete description of resource-switching and all the types of configurations that you can specify — screen orientation, touchscreen type, and so on — see Providing Alternative Resources.)
When you write your application:
When a user runs your application:
When you write your application, you create default and alternative resources
for your application to use. To create resources, you place files within
specially named subdirectories of the project's
Why Default Resources Are Important
Whenever the application runs in a locale for which you have not provided
locale-specific text, Android will load the default strings from
res/values/strings.xml. If this default file is absent, or if it
is missing a string that your application needs, then your application will not run
and will show an error.
The example below illustrates what can happen when the default text file is incomplete.
An application's Java code refers to just two strings,
text_b. This application includes a localized resource file
res/values-en/strings.xml) that defines
text_b in English. This application also includes a default
resource file (
res/values/strings.xml) that includes a
text_a, but not for
- This application might compile without a problem. An IDE such as Eclipse will not highlight any errors if a resource is missing.
- When this application is launched on a device with locale set to English,
the application might run without a problem, because
res/values-en/strings.xmlcontains both of the needed text strings.
- However, the user will see an error message and a Force Close button when this application is launched on a device set to a language other than English. The application will not load.
To prevent this situation, make sure that a
file exists and that it defines every needed string. The situation applies to
all types of resources, not just strings: You
need to create a set of default resource files containing all
the resources that your application calls upon — layouts, drawables,
animations, etc. For information about testing, see
Testing for Default Resources.
Using Resources for Localization
How to Create Default Resources
Put the application's default text in a file with the following location and name:
res/values/strings.xml (required directory)
The text strings in
res/values/strings.xml should use the
default language, which is the language that you expect most of your application's users to
The default resource set must also include any default drawables and layouts,
and can include other types of resources such as animations.
res/drawable/(required directory holding at least
one graphic file, for the application's icon on Google Play)
res/layout/ (required directory holding an XML
file that defines the default layout)
res/anim/ (required if you have any
res/xml/ (required if you have any
res/raw/ (required if you have any
Tip: In your code, examine each reference to an Android resource. Make sure that a default resource is defined for each one. Also make sure that the default string file is complete: A localized string file can contain a subset of the strings, but the default string file must contain them all.
How to Create Alternative Resources
A large part of localizing an application is providing alternative text for different languages. In some cases you will also provide alternative graphics, sounds, layouts, and other locale-specific resources.
An application can specify many
directories, each with different qualifiers. To create an alternative resource for
a different locale, you use a qualifier that specifies a language or a
language-region combination. (The name of a resource directory must conform
to the naming scheme described in
or else it will not compile.)
Suppose that your application's default language is English. Suppose also
that you want to localize all the text in your application to French, and most
of the text in your application (everything except the application's title) to
Japanese. In this case, you could create three alternative
files, each stored in a locale-specific resource directory:
Contains English text for all the strings that the application uses, including text for a string named
Contain French text for all the strings, including
Contain Japanese text for all the strings except
If your Java code refers to
R.string.title, here is what will
happen at runtime:
- If the device is set to any language other than French, Android will load
- If the device is set to French, Android will load
Notice that if the device is set to Japanese, Android will look for
title in the
res/values-ja/strings.xml file. But
because no such string is included in that file, Android will fall back to the
default, and will load
title in English from the
Which Resources Take Precedence?
If multiple resource files match a device's configuration, Android follows a set of rules in deciding which file to use. Among the qualifiers that can be specified in a resource directory name, locale almost always takes precedence.
Assume that an application includes a default set of graphics and two other sets of graphics, each optimized for a different device setup:
Contains default graphics.
Contains graphics optimized for use with a device that expects input from a stylus and has a QVGA low-density screen in landscape orientation.
Contains graphics optimized for use with Japanese.
If the application runs on a device that is configured to use Japanese,
Android will load graphics from
res/drawable-ja/, even if the
device happens to be one that expects input from a stylus and has a QVGA
low-density screen in landscape orientation.
Exception: The only qualifiers that take precedence over locale in the selection process are MCC and MNC (mobile country code and mobile network code).
Assume that you have the following situation:
- The application code calls for
- Two relevant resource files are available:
res/values-mcc404/strings.xml, which includes
text_ain the application's default language, in this case English.
res/values-hi/strings.xml, which includes
- The application is running on a device that has the following
- The SIM card is connected to a mobile network in India (MCC 404).
- The language is set to Hindi (
Android will load
res/values-mcc404/strings.xml (in English), even if the device is
configured for Hindi. That is because in the resource-selection process, Android
will prefer an MCC match over a language match.
The selection process is not always as straightforward as these examples suggest. Please read How Android Finds the Best-matching Resource for a more nuanced description of the process. All the qualifiers are described and listed in order of precedence in Table 2 of Providing Alternative Resources.
Referring to Resources in Java
In your application's Java code, you refer to resources using the syntax
For more about this, see Accessing Resources.
For a complete overview of the process of localizing and distributing an Android application, see the Localization Checklist document.
Design your application to work in any locale
You cannot assume anything about the device on which a user will run your application. The device might have hardware that you were not anticipating, or it might be set to a locale that you did not plan for or that you cannot test. Design your application so that it will function normally or fail gracefully no matter what device it runs on.
Important: Make sure that your application includes a full set of default resources.
Make sure to include
res/drawable/ and a
res/values/ folders (without any
additional modifiers in the folder names) that contain all the images and text
that your application will need.
If an application is missing even one default resource, it will not run on a
device that is set to an unsupported locale. For example, the
res/values/strings.xml default file might lack one string that
the application needs: When the application runs in an unsupported locale and
attempts to load
res/values/strings.xml, the user will see an
error message and a Force Close button. An IDE such as Eclipse will not
highlight this kind of error, and you will not see the problem when you
test the application on a device or emulator that is set to a supported locale.
For more information, see Testing for Default Resources.
Design a flexible layout
If you need to rearrange your layout to fit a certain language (for example
German with its long words), you can create an alternative layout for that
language (for example
res/layout-de/main.xml). However, doing this
can make your application harder to maintain. It is better to create a single
layout that is more flexible.
Another typical situation is a language that requires something different in its layout. For example, you might have a contact form that should include two name fields when the application runs in Japanese, but three name fields when the application runs in some other language. You could handle this in either of two ways:
- Create one layout with a field that you can programmatically enable or disable, based on the language, or
- Have the main layout include another layout that includes the changeable field. The second layout can have different configurations for different languages.
Avoid creating more resource files and text strings than you need
You probably do not need to create a locale-specific
alternative for every resource in your application. For example, the layout
defined in the
res/layout/main.xml file might work in any locale,
in which case there would be no need to create any alternative layout files.
Also, you might not need to create alternative text for every string. For example, assume the following:
- Your application's default language is American
English. Every string that the application uses is defined, using American
English spellings, in
- For a few important phrases, you want to provide British English spelling. You want these alternative strings to be used when your application runs on a device in the United Kingdom.
To do this, you could create a small file called
res/values-en-rGB/strings.xml that includes only the strings that
should be different when the application runs in the U.K. For all the rest of
the strings, the application will fall back to the defaults and use what is
Use the Android Context object for manual locale lookup
You can look up the locale using the
that Android makes available:
String locale = context.getResources().getConfiguration().locale.getDisplayName();
Testing Localized Applications
Testing on a Device
Keep in mind that the device you are testing may be significantly different from the devices available to consumers in other geographies. The locales available on your device may differ from those available on other devices. Also, the resolution and density of the device screen may differ, which could affect the display of strings and drawables in your UI.
To change the locale or language on a device, use the Settings application.
Testing on an Emulator
For details about using the emulator, see See Android Emulator.
Creating and using a custom locale
A "custom" locale is a language/region combination that the Android system image does not explicitly support. (For a list of supported locales in Android platforms see the Version Notes in the SDK tab). You can test how your application will run in a custom locale by creating a custom locale in the emulator. There are two ways to do this:
- Use the Custom Locale application, which is accessible from the Application tab. (After you create a custom locale, switch to it by pressing and holding the locale name.)
- Change to a custom locale from the adb shell, as described below.
When you set the emulator to a locale that is not available in the Android system image, the system itself will display in its default language. Your application, however, should localize properly.
Changing the emulator locale from the adb shell
To change the locale in the emulator by using the adb shell.
- Pick the locale you want to test and determine its BCP-47 language tag, for
example, Canadian French would be
- Launch an emulator.
- From a command-line shell on the host computer, run the following
or if you have a device attached, specify that you want the emulator by adding the
adb -e shell
- At the adb shell prompt (
#), run this command:
setprop persist.sys.locale [BCP-47 language tag];stop;sleep 5;startReplace bracketed sections with the appropriate codes from Step 1.
For instance, to test in Canadian French:
setprop persist.sys.locale fr-CA;stop;sleep 5;start
This will cause the emulator to restart. (It will look like a full reboot, but it is not.) Once the Home screen appears again, re-launch your application (for example, click the Run icon in Eclipse), and the application will launch with the new locale.
Testing for Default Resources
Here's how to test whether an application includes every string resource that it needs:
- Set the emulator or device to a language that your application does not
support. For example, if the application has French strings in
res/values-fr/but does not have any Spanish strings in
res/values-es/, then set the emulator's locale to Spanish. (You can use the Custom Locale application to set the emulator to an unsupported locale.)
- Run the application.
- If the application shows an error message and a Force Close button, it might
be looking for a string that is not available. Make sure that your
res/values/strings.xmlfile includes a definition for every string that the application uses.
If the test is successful, repeat it for other types of
configurations. For example, if the application has a layout file called
res/layout-land/main.xml but does not contain a file called
res/layout-port/main.xml, then set the emulator or device to
portrait orientation and see if the application will run.